Tarkett ProGen 7x60
installation constraints 9/9 specification claims 3/6
Tarkett’s ProGen is a SPC (rigid polymeric core) rigid core plank measuring 7 by 60 inches at 5 mm overall. Everything on this page is Tarkett’s own declaration about it, read from documents Tarkett publishes, and reproduced next to the document each figure came from.
The row is the product line, not a color. Tarkett publishes one specification per line and per plank size, and the color underneath changes none of the figures below, so this page covers every color offered at 7 × 60 in.
Every cell in the tables below is one of four things. A figure means the manufacturer declares it, and the document it was read from is named beside it. A cell reading no declaration means the manufacturer publishes nothing for that field, which is a finding about the product rather than a gap in this table. A cell reading held pending resolution means two independent readings of the same document disagreed, and nothing is published until a person settles it. A cell reading not collected means no document has been read for that field yet, and that shortfall is ours rather than the maker's.
| Field | Declared |
|---|---|
| Wear layer | 20 mil (0.508 mm)“Wear Layer: .020" (.51 mm)” — ProGen Rigid Core Luxury Vinyl Flooring — Product Specification“Wearlayer Thickness: 0.020" (.51 mm)”ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| Wear layer finish | no declarationThis reference’s note: the wear layer is given as a thickness only; no coating or reinforcement is namedThis reference’s note: the commercial sheet gives a wear layer thickness and nothing about its chemistryProGen Rigid Core Luxury Vinyl Flooring — Product Specification, p. 1 · read |
| Locking system | angle-angle (no system named)“Locking Mechanism: Angle-Angle”“Characteristics: Locking Mechanism: Angle-Angle”This reference’s note: no proprietary locking system is named on any of the four documentsProGen Rigid Core Luxury Vinyl Flooring — Product Specification, p. 1 · read |
| Attached pad | Yes“Acoustical Backing: 0.039" (1 mm) IXPE” — ProGen Rigid Core Luxury Vinyl Flooring — Product Specification“Accoustical Backing: 0.039" (1mm) IXPE”ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| Pad material | IXPE“Acoustical Backing: 0.039" (1 mm) IXPE” — ProGen Rigid Core Luxury Vinyl Flooring — Product Specification“Accoustical Backing: 0.039" (1mm) IXPE”ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| Residential warranty | Lifetime“LIFETIME RESIDENTIAL LIMITED WARRANTY”“Lifetime Extreme Performance Residential Limited Warranty ... Years 21-Life of Floor 10% Material only”Tarkett Limited Warranty — ProGen Collection Flooring, rev. 2018-07-01 · read |
This manufacturer's own terms do not permit their photograph to be reproduced here, so none was selected and none was looked for.
Durability
The wear layer is 20 mil, or 0.508 mm. That is the clear film above the printed layer, and not the thickness figure: this plank is 5 mm overall, of which 4 mm is core and 1 mm is the backing bonded to its underside.
No reinforcement is named for the wear layer in the documents read. Where a maker does name one, that name sits next to the mil figure on this site; here the mil figure stands alone, which is worth knowing before comparing it against a product whose layer is treated.
There is no abrasion result. Tarkett declares no ASTM D4060 cycle count for this product, so the only laboratory check on the wear layer figure is absent. See wear layer depth.
| Field | Declared |
|---|---|
| Wear layer | 20 mil (0.508 mm)“Wear Layer: .020" (.51 mm)” — ProGen Rigid Core Luxury Vinyl Flooring — Product Specification“Wearlayer Thickness: 0.020" (.51 mm)”ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| Wear layer finish | no declarationThis reference’s note: the wear layer is given as a thickness only; no coating or reinforcement is namedThis reference’s note: the commercial sheet gives a wear layer thickness and nothing about its chemistryProGen Rigid Core Luxury Vinyl Flooring — Product Specification, p. 1 · read |
| Total thickness | 5 mm“Nominal Thickness: 0.197" (5 mm)” — ProGen Rigid Core Luxury Vinyl Flooring — Product Specification“Nominal Thickness: 0.197" (5 mm)”ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| Core thickness | 4 mm“Core Thickness: 0.157" (4 mm)” — ProGen Rigid Core Luxury Vinyl Flooring — Product Specification“Core Thickness: 0.157" (4 mm)”ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| Abrasion cycles | no declarationThis reference’s note: no Taber abrasion result appears on either specification sheetThis reference’s note: no abrasion result is publishedProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
Joint and pad
The locking system is not named. It is declared as angle-angle (no system named), which tells you how it goes down but not whose mechanism it is. An angle-angle joint at least rules out the drop-lock action installers warn about. See locking systems, named and unnamed.
A pad is bonded to the underside at the factory, declared as IXPE. That rules out a second underlayment beneath it. See attached pad material.
| Field | Declared |
|---|---|
| Locking system | angle-angle (no system named)“Locking Mechanism: Angle-Angle”“Characteristics: Locking Mechanism: Angle-Angle”This reference’s note: no proprietary locking system is named on any of the four documentsProGen Rigid Core Luxury Vinyl Flooring — Product Specification, p. 1 · read |
| Edge profile | micro-bevelled or painted bevel“Edge Treatment: Micro Beveled or Painted Bevel” — ProGen Rigid Core Luxury Vinyl Flooring — Product Specification“Edge Treatment: Microbeveled or Painted Bevel”ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| Attached pad | Yes“Acoustical Backing: 0.039" (1 mm) IXPE” — ProGen Rigid Core Luxury Vinyl Flooring — Product Specification“Accoustical Backing: 0.039" (1mm) IXPE”ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| Pad material | IXPE“Acoustical Backing: 0.039" (1 mm) IXPE” — ProGen Rigid Core Luxury Vinyl Flooring — Product Specification“Accoustical Backing: 0.039" (1mm) IXPE”ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| Pad thickness | 1 mm“Acoustical Backing: 0.039" (1 mm) IXPE” — ProGen Rigid Core Luxury Vinyl Flooring — Product Specification“Accoustical Backing: 0.039" (1mm) IXPE”ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| Unique planks | no declarationThis reference’s note: no pattern repeat or unique-plank count is published on either specification sheetThis reference’s note: the number of styles per size is published; the number of unique planks in a carton is notProGen Rigid Core Luxury Vinyl Flooring — Product Specification, p. 1 · read |
Warranty: what it does not cover
The residential term is published as a word, not a number: a lifetime warranty. No document read for it turns that into a number.
Labor is covered, but conditionally: professionally installed floors only, and only in years one and two of the term. See lifetime warranties and labor.
14 exclusions are named in the warranty, and they are listed in full below, not summarized. Among them are the everyday sort a household does not expect to be excluded: rubber or PVC backed mats; sunlight and UV fading; castors and rolling loads; and two others in the list below. The grouping is this reference's; the wording below is the maker's.
| Field | Declared |
|---|---|
| Residential warranty | Lifetime“LIFETIME RESIDENTIAL LIMITED WARRANTY”“Lifetime Extreme Performance Residential Limited Warranty ... Years 21-Life of Floor 10% Material only”Tarkett Limited Warranty — ProGen Collection Flooring, rev. 2018-07-01 · read |
| Light commercial warranty | 15 years“15-YEAR LIGHT COMMERCIAL LIMITED WARRANTY”“15 Year Light Commercial Wear and Manufacturing Defects Limited Warranty”Tarkett Limited Warranty — ProGen Collection Flooring, rev. 2018-07-01 · read |
| Commercial warranty | no declarationThis reference’s note: three warranties are published (residential, light commercial and 3-seasons room), and no full commercial term is offeredThis reference’s note: the warranty document names residential, light commercial and 3-seasons room terms and no otherTarkett Limited Warranty — ProGen Collection Flooring, rev. 2018-07-01 · read |
| Prorated | Yes“Lifetime Extreme Performance Residential Limited Warranty: Years 1-2 Material and labor, if professionally installed. Years 3-5 Material only. Years 6-10 75% Material only. Years 11-15 50% Material only. Years 16-20 25% Material only. Years 21-Life of Floor 10% Material only”“15 Year Light Commercial ... Year 1 Material and labor, if professionally installed. Year 2 Material and labor (50%), if professionally installed. Years 3-5 Material only. Years 6-10 50% Material only. Years 11-15 25% Material Only”Tarkett Limited Warranty — ProGen Collection Flooring, rev. 2018-07-01 · read |
| Labor covered | Yes“Labor costs, when covered by the warranty, will only be paid if professional installation was paid for when the original floor was installed.”“Years 1-2 Material and labor, if professionally installed.”This reference’s note: labor is covered for the first two years of the residential term and the first two of the 3-seasons termTarkett Limited Warranty — ProGen Collection Flooring, rev. 2018-07-01 · read |
| Sunlight clause | May fade under direct and indirect sunlight.“3-Seasons Room Wear and Manufacturing Defects Limited Warranty: The ProGen Collection flooring: Will not warp and/or buckle under direct sunlight. May fade under direct and indirect sunlight.”“Fading resulting from direct and indirect exposure to sunlight.”This reference’s note: listed again among the exclusions, so the 3-seasons sentence is the term and not a cautionTarkett Limited Warranty — ProGen Collection Flooring, rev. 2018-07-01 · read |
Named exclusions, from the maker’s own warranty document:
- Abuse
- Hydrostatic pressure
- Loss of gloss
- Damage due to stiletto or high heel shoes
- Damage or stains from products other than common household products
- Damage or stains from rubber backing or dyes in mats, rugs and carpets
- Fading from direct and indirect exposure to sunlight
- Damage from heat generated by refrigerators or heating units
- Discoloration or staining from moisture, mold, mildew or alkaline substances
- Damage due to caster action or rolling loads
- Damage from loads exceeding the recommended static load limit
- Damage due to improper installation and maintenance
- Claims reported more than 30 days after the defect was discovered
- Application in other than owner-occupied or tenant-occupied residences
14 entries are published here; how many the document lists was not recorded.
“LIMITED WARRANTY EXCLUSIONS ... Hydrostatic pressure ... Loss of gloss ... Damage due to women's stiletto or high heels shoes ... Damage due to caster action or rolling loads in residential, light commercial, 3 seasons and commercial applications” · “Damage/stains due to products other than common household products ... Damage/stains due to rubber backing or dyes used in floor mats, rugs and carpets ... Damage due to improper installation and maintenance ... Application in other than owner-occupied or tenant-occupied residences ... Contact your Tarkett dealer no later than 30 days after the discovery of the defect.” — Tarkett Limited Warranty — ProGen Collection Flooring, rev. 2018-07-01 · read
This reference’s note: the quotation is an excerpt of the list, elided
Installation constraints
9 of 9 declared
The floor may run 40 linear feet before a transition is required. Converted for comparison against makers who declare the limit the other way round, that is about 1,600 square feet, but only if the field is square. A long narrow room reaches the linear bound first. See how far a floor runs before a transition.
That limit is conditional: it applies to light commercial and spaces without permanent HVAC; residential space with fully operational HVAC has no stated limit. A limit that holds in one application but not in another cannot be read out of the column alone, and a reader who takes the number without the condition takes the wrong half of the sentence.
A 0.25 in gap is required, and the reading recorded for this cell names what it is measured to: walls and vertical objects and surfaces.
The subfloor limit is declared as 90% relative humidity, and the test named for it is ASTM F2170. A calcium chloride limit of 6 lb is also declared, under ASTM F1869; the two are separate tests of different volumes of the slab and neither substitutes for the other.
No acclimation is required, which is the practical difference between this and a wood floor. The material can be laid the day it arrives. The reading records a condition on that: the material needs none; the maker still asks for a room between 65F and 85F for 48 hours before and during installation.
Over radiant heat the floor surface may not exceed 85 °F (29.4 °C). That is a surface temperature, not a thermostat setting. What the figure does not carry is a consequence: radiant heat is not among the warranty exclusions read for this product, so it stands as an installation requirement, not as a stated ground for refusing a claim.
The reading gives a service temperature band of 55 to 100 °F. It is the clause that catches holiday homes and unheated rooms. Whether leaving the band costs the cover is a separate question, and the exclusions are below. A three-season room is permitted; the permission is stated without a separate band of its own.
| Constraint | Declared |
|---|---|
| Acclimation | None required“ProGen does not require acclimation to the jobsite conditions prior to installation.”“Room temperature shall be between 65F and 85F for 48 hours before and during installation. ProGen does not require acclimation to the jobsite conditions prior to installation.”ProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| Approved adhesives | Tarkett Q Bond One · Tarkett 959 Vinyl Tile and Plank Adhesive“Apply Tarkett Q bond One or Tarkett 959 Vinyl Tile and Plank Adhesive using 1/32" x 1/16" x 1/32" U notch trowel to the riser and tread portion of the step.”“INSTALLING ON STAIRS ... Apply Tarkett Q bond One or Tarkett 959 Vinyl Tile and Plank Adhesive”This reference’s note: named for the stair application only; the field installation is floatingProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| Subfloor flatness | 1/8 in over 8 ft“The substrate must be flat within 1/8" in 8' (3.17mm in 2.4m).”“Flat to within 1/8" in 8' (3.1mm in 2.4m). Any unevenness (humps or dips) must be sanded down or filled with a cement-based patching compound.”ProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| Glue-down permitted | No“ProGen floors are floating floors and should not be adhered or nailed to the substrate. The only exception is when installing on stairs.”“ProGen floors are floating floors and should not be adhered or nailed to the substrate.”ProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| Max run without a transition | 40 linear ft“When installing ProGen in Light Commercial applications, a transition molding must be placed at egress doorways and when installations span greater than 40' in any direction.”“No transitions are required when installing in Residential applications with fully operational HVAC. NOTE: When installing ProGen in Light Commercial applications or in fully-enclosed spaces that do not have permanent heating and cooling systems in operation, a transition molding must be placed at egress doorways and when installations span greater than 40' in any direction.”ProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| Perimeter expansion gap | 0.25 in“A minimum 1/4" (6.3 mm) expansion space is required around all walls and vertical objects. Allow a 1/2" (12.7 mm) space for installations over wood substrates that may be affected by moisture ... or when installing in areas without permanent HVAC controls”“Place 1/4" (6.3 mm) spacers between the short and long side of the planks and the wall, use 1/2" (12.7 mm) spacers for installations over wood substrates ... or when installing in areas without permanent HVAC controls (3 season rooms, seasonal vacation homes and cabins).”ProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| Vapor barrier required | No“The ground under the crawl space shall be covered with 10 mil or thicker polyethylene sheeting”“Do not use foam padding under ProGen”This reference’s note: no vapor retarder is called for under the floor; polyethylene appears only under a crawl spaceThis reference’s note: the concrete substrate section requires moisture testing and, above the limits, a remediation system to ASTM F3010This reference’s note: not a polyethylene retarderThis reference’s note: is the only thing forbidden beneath the floorProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| Radiant heat limit | 85 °F (29.4 °C)“Concrete surface must never exceed 85F (29.4C)”“48 hours after installation, gradually increase the thermostat in increments of 5 every twenty-four hours, never exceeding 85F (29.4C)”ProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| Service temperature range | 55–100 °F“Post installation temperature in HVAC controlled applications with a 1/4" (6.3 mm) spacing at all vertical surfaces must be maintained between 55F and 100F (12C and 38C).”“must be maintained between 55F and 100F (12C and 38C). Ideal ambient relative humidity is between 40% and 70%.”ProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| Subfloor MVER limit | 6 lb/1000 sq ft/24h“ASTM F1869 ... Must test to within 6 lbs. / 1,000 ft2 / 24 hours”“or moisture vapor exceeding 6 lbs./1,000 sq. ft./24 hrs. when tested according to ASTM F1869” — Tarkett Limited Warranty — ProGen Collection FlooringProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| MVER test method | ASTM F1869“ASTM F1869 ... Must test to within 6 lbs. / 1,000 ft2 / 24 hours”“moisture vapor exceeding 6 lbs./1,000 sq. ft./24 hrs. when tested according to ASTM F1869” — Tarkett Limited Warranty — ProGen Collection FlooringProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| Subfloor pH range | no declarationThis reference’s note: the subfloor guidelines set moisture limits by two methods but publish no pH rangeThis reference’s note: no alkalinity limit is stated anywhere in the subfloor guidelinesProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| Subfloor RH limit | 90% RH“ASTM F2170 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes: Must test to within 90% RH”“Excessive Moisture: is defined as relative internal humidity exceeding 90% when tested according to ASTM F2170” — Tarkett Limited Warranty — ProGen Collection FlooringProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| RH test method | ASTM F2170“ASTM F2170 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes”“relative internal humidity exceeding 90% when tested according to ASTM F2170” — Tarkett Limited Warranty — ProGen Collection FlooringProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
| Three-season room | Yes“ProGen may be installed in fully enclosed spaces that do not have permanent heating and cooling systems in operation. These spaces include seasonal vacation homes, lake cabins, 3 season rooms, etc.”“Suitable for Residential, Light Commercial, and 3-Season type environments.” — ProGen Rigid Core Luxury Vinyl Flooring — Product SpecificationProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions, rev. 2024-01-14 · read |
Specification claims
3 of 6 declared
Tarkett publishes the fire performance as a flux and stops there: 0.45 W/cm², with no class beside it. ASTM E648 puts Class I at 0.45 W/cm² and above and Class II at 0.22 and above, which places this figure at Class I. That placement is arithmetic done here on Tarkett's number, not a class Tarkett printed. A submittal that turns on the class should carry the test report, not this line.
The slip figure is 0.5 under ASTM D2047 (static coefficient of friction). That matters more than the number: the threshold most specifications quote, 0.42, belongs to ANSI A326.3. That standard measures a wet dynamic coefficient, and a static coefficient from a dry test is not the same measurement read on the same scale. The two cannot be compared, and this figure cannot be used to satisfy a specification written against A326.3.
| Claim | Declared |
|---|---|
| ASTM product standard | ASTM F3261“Rigid Polymeric Core Specifications: ASTM F3261 Class 1, Type A or B, Grade 1, Backing Class B”“2.1 Rigid Polymeric Core Specifications: ASTM F3261 Class 1, Type A or B, Grade 1, Backing Class B”ProGen Rigid Core Luxury Vinyl Flooring — Product Specification, p. 1 · read |
| Certifications | FloorScore · Assure Certified“FloorScore Certification: SCS-EC10.3-2014 v4.0 / Assure Certified: SCS-AC-07772”“2.9 FloorScore Certification: SCS-EC10.3-2014 v4.0 / 2.10 Assure Certified: SCS-AC-07772”This reference’s note: the commercial sheet cites FloorScore v3.0 and does not mention AssureProGen Rigid Core Luxury Vinyl Flooring — Product Specification, p. 1 · read |
| Commercial class claimed | Light Commercial“Light Commercial Use: is defined as commercial areas that experience foot-traffic only (no rolling loads).”“Suitable for Residential, Light Commercial, and 3-Season type environments.” — ProGen Rigid Core Luxury Vinyl Flooring — Product SpecificationTarkett Limited Warranty — ProGen Collection Flooring, rev. 2018-07-01 · read |
| Slip test condition | no declarationThis reference’s note: the method is named and the condition is not; D2047 is a dry test, and reading the condition off the method would be this reference talking rather than the makerThis reference’s note: wet or dry is not stated on either sheetProGen Rigid Core Luxury Vinyl Flooring — Product Specification, p. 1 · read |
| Slip test method | ASTM D2047 (static coefficient of friction)“Slip Resistance: ASTM D2047: SCOF >= 0.5” — ProGen Rigid Core Luxury Vinyl Flooring — Product Specification“ASTM D2047: SCOF”This reference’s note: a static coefficient, not the wet dynamic coefficient of ANSI A326.3ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| Slip resistance | 0.5“Slip Resistance: ASTM D2047: SCOF >= 0.5” — ProGen Rigid Core Luxury Vinyl Flooring — Product Specification“2.7. Slip Resistance: ASTM D2047: SCOF >= 0.5”ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| E648 class | no declarationThis reference’s note: the flux figure is published with no class named beside itThis reference’s note: neither sheet names a class; the residential sheet omits the fire line altogetherProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| Critical radiant flux | ≥ 0.45 W/cm²“Fire Performance: ASTM E648: >= 0.45 w/cm2”“2.8. Fire Performance: ASTM E648: >= 0.45 w/cm2”ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| F3261 grade | Grade 1“ASTM F3261 Class 1, Type A or B, Grade 1, Backing Class B”“Class 1, Type A or B, Grade 1, Backing Class B”This reference’s note: the commercial specification sheet names no product standard at allProGen Rigid Core Luxury Vinyl Flooring — Product Specification, p. 1 · read |
| F970 indentation | no declarationThis reference’s note: no residual indentation value is published, only a pass markThis reference’s note: no indentation depth is publishedProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| Static load limit | no declaration“Residual Indentation : ASTM F1914: Passes”This reference’s note: no static load result is published; the indentation line cites ASTM F1914, which is a different testThis reference’s note: the residential sheet publishes no static load figure eitherProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification, rev. 2021-01-12, p. 1 · read |
| IIC assembly | no declarationThis reference’s note: no floor-ceiling assembly is named, and none could be since no IIC is claimedThis reference’s note: E2179 fixes the reference assembly by definition, but no tested floor-ceiling assembly is publishedProGen Rigid Core Luxury Vinyl Flooring — Product Specification, p. 1 · read |
| Impact insulation class | no declaration“Impact Sound: ASTM E2179: dIIC >= 21 dB”“2.6. Impact Sound: ASTM E2179: dIIC >= 21 dB” — ProGen Rigid Core Floating Luxury Vinyl Floors — Product SpecificationThis reference’s note: no impact insulation class is published; what is published is a deltaThis reference’s note: a delta against a bare reference slab, not an impact insulation classProGen Rigid Core Luxury Vinyl Flooring — Product Specification, p. 1 · read |
| STC assembly | no declarationThis reference’s note: no assembly is namedThis reference’s note: no STC assembly appearsProGen Rigid Core Luxury Vinyl Flooring — Product Specification, p. 1 · read |
| Sound transmission class | no declarationThis reference’s note: no airborne sound transmission class is publishedThis reference’s note: no STC figure appearsProGen Rigid Core Luxury Vinyl Flooring — Product Specification, p. 1 · read |
Source documents
4 documents
| Document | Address |
|---|---|
| ProGen & ProGen Plus Floating Luxury Vinyl Plank Installation Instructions | https://tarketthome.com/TarkettResidential/media/Tarkett-Residential/Product%20Documents/Hard%20Flooring/LVT/LVT_ProGen_ProGenPlus_IN.pdf |
| ProGen Rigid Core Luxury Vinyl Flooring — Product Specification | https://tarketthome.com/TarkettResidential/media/Tarkett-Residential/Product%20Documents/Hard%20Flooring/LVT/PROGEN_SpecSheet.pdf |
| ProGen Rigid Core Floating Luxury Vinyl Floors — Product Specification | https://media.tarkett-image.com/docs/DS_TNA_ProGen.pdf |
| Tarkett Limited Warranty — ProGen Collection Flooring | https://media.tarkett.com/docs/GR_EN_ProGen_Warranty.pdf |
How much of this row is filled
Of the 9 core installation limits this reference tracks, Tarkett declares all 9, and enough for the installation coverage badge.
Of the 6 core standardized test results this reference tracks, Tarkett declares 3 and states nothing for the other 3, so the specification badge is not earned.
13 fields are recorded as undeclared instead of left blank: Abrasion cycles, Slip test condition, E648 class, F970 indentation, Static load limit, IIC assembly, Impact insulation class, Unique planks, among others. Each of those is the maker publishing nothing, not a failure to look here.
The opposite gap is recorded too, and this one is ours and not Tarkett’s: 1 field in the dictionary has not been read for this product: EPD / HPD. It is missing from the table for want of a document held here, not because Tarkett publishes nothing about it.